ATMega128 UART 통신 샘플(RS232, 0번 USART)

프로그램/ATMega

ATMega128 UART 통신 샘플(RS232, 0번 USART)

와이즈캣 2010. 4. 2. 12:33

후배한테 소스 주면서...
이참에 밀린 소스도 정리할 겸...
공개해 드립니다~
유용하게 사용하시길 바랍니다~

main.c

#include "main.h"

#include "serial.h"


int main(void)

{

  Init_Uart0();

  sei();

  

  while(1)

  {

    sleep();

  }

  

  return 0;

}

main.h

#ifndef __MAIN_HEADER__


#define sei()    __asm__ __volatile__ ("sei" ::)

#define sleep()  __asm__ __volatile__ ( "sleep" "\n\t" :: )


#endif // __MAIN_HEADER__

serial.c

#include "serial.h"


unsigned char Uart_ReadChar(void)

{

   while (0==(UCSR0A & (1<<RXC)));

   return UDR0;

}

void   Uart_WriteChar(unsigned char data)

{

  while (0==(UCSR0A & (1<<TXC)));

  UDR0 = data;

}

void Init_Uart0(void)

{

  UBRR0L = (unsigned char)BAUD_RATE_L;

  UBRR0H = (unsigned char)BAUD_RATE_H;


  // RX Complete Interrupt ON

  // TX Complete Interrupt OFF

  // USART Data Register Empty Interrupt OFF

  // Receiver Enable

  // Transmitter Enable

  // Character Size UCSZ2 = 0

  UCSR0B = (1 << TXEN ) | (1 << RXEN )|(1<<RXCIE);


  // USART Mode     = Asynchronous

  // Parity Mode     = Disabled(0,0)

  // Stop Bit Select    = 1-bit

  // Character Size UCSZ = 8Bit(0, 1, 1)

  // Clock Polarity    = Not Setting(synchronous mode only)

  UCSR0C = (1 << UCSZ1) | (1 << UCSZ0);

}


void __vector_18 (void)

{

  static unsigned char ucData;


  // Read

  while (0==(UCSR0A & (1<<RXC)));

  ucData = UDR0;


  // Echo

  while (0==(UCSR0A & (1<<TXC)));

  UDR0 = ucData;

}

serial.h

#ifndef __ATMEGA128_UART__


#include "main.h"


//USART0 Define

#define UBRR0L  (*((unsigned char *)0x29))

#define UBRR0H  (*((unsigned char *)0x90))

#define UCSR0A  (*((unsigned char *)0x2B))

#define UCSR0B  (*((unsigned char *)0x2A))

#define UDR0    (*((unsigned char *)0x2C))

#define UCSR0C  (*((unsigned char *)0x95))

//UCSRA Define

#define RXC    7  // USART Receive Complete

#define TXC    6  // USART Transmit Complete

#define UDRE   5  // USART Data Register Empty

#define FE     4  // Frame Error

#define DOR    3  // Data OverRun

#define UPE    2  // Parity Error

#define U2X    1  // Double the USART Transmission Speed

#define MPCM   0  // Multi-Processor Communication Mode

//UCSRB Define

#define RXCIE  7  // RX Complete Interrupt Enable

#define TXCIE  6  // TX Complete Interrupt Enable

#define UDRIE  5  // USART Data Register Empty Interrupt Enable

#define RXEN   4  // Receiver Enable

#define TXEN   3  // Transmitter Enable

#define UCSZ2  2  // Character Size

#define RXB8   1  // Receive Data Bit 8

#define TXB8   0  // Transmit Data Bit 8

//UCSRC Define

#define UMSEL  6  // USART Mode Select

#define UPM1   5  // Parity Mode

#define UPM0   4  // Parity Mode

#define USBS   3  // Stop Bit Select

#define UCSZ1  2  // Character Size

#define UCSZ0  1  // Character Size

#define UCPOL  0  // Clock Polarity


#define BAUD_RATE   115200

#define BAUD_RATE_L (((F_CPU / (16L * BAUD_RATE)) - 1))

#define BAUD_RATE_H (((F_CPU / (16L * BAUD_RATE)) - 1) >> 8)


void           Init_Uart0(void);

unsigned char  Uart_ReadChar(void);

void           Uart_WriteChar(unsigned char);

void           __vector_18 (void) __attribute__ ((signal, used, externally_visible));


#endif //__ATMEGA128_UART__

makefile

MCU = atmega128

F_CPU = 16000000

FORMAT = ihex

TARGET = main

OBJDIR = .

SRC = $(TARGET).c serial.c

CPPSRC = 

ASRC =

OPT = s

DEBUG = dwarf-2

EXTRAINCDIRS = 


# Compiler flag to set the C Standard level.

#     c89   = "ANSI" C

#     gnu89 = c89 plus GCC extensions

#     c99   = ISO C99 standard (not yet fully implemented)

#     gnu99 = c99 plus GCC extensions

CSTANDARD = -std=gnu99


CDEFS = -DF_CPU=$(F_CPU)UL

ADEFS = -DF_CPU=$(F_CPU)


CPPDEFS = -DF_CPU=$(F_CPU)UL


CFLAGS = -g$(DEBUG)

CFLAGS += --save-temps

CFLAGS += $(CDEFS)

CFLAGS += -O$(OPT)

CFLAGS += -funsigned-char

CFLAGS += -funsigned-bitfields

CFLAGS += -fpack-struct

CFLAGS += -fshort-enums

CFLAGS += -Wall

CFLAGS += -Wstrict-prototypes

CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

CFLAGS += $(CSTANDARD)


CPPFLAGS = -g$(DEBUG)

CPPFLAGS += $(CPPDEFS)

CPPFLAGS += -O$(OPT)

CPPFLAGS += -funsigned-char

CPPFLAGS += -funsigned-bitfields

CPPFLAGS += -fpack-struct

CPPFLAGS += -fshort-enums

CPPFLAGS += -fno-exceptions

CPPFLAGS += -Wall

CFLAGS += -Wundef

CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))


ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

PRINTF_LIB = 

SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

SCANF_LIB = 

MATH_LIB = -lm

EXTRALIBDIRS = 

EXTMEMOPTS =

LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

LDFLAGS += $(EXTMEMOPTS)

LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

AVRDUDE_PROGRAMMER = stk500v2

AVRDUDE_PORT = com1    # programmer connected to serial device

AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)


DEBUG_MFREQ = $(F_CPU)

DEBUG_UI = insight

DEBUG_BACKEND = avarice

GDBINIT_FILE = __avr_gdbinit

JTAG_DEV = /dev/com1

DEBUG_PORT = 4242

DEBUG_HOST = localhost


SHELL = sh

CC = avr-gcc

OBJCOPY = avr-objcopy

OBJDUMP = avr-objdump

SIZE = avr-size

AR = avr-ar rcs

NM = avr-nm

AVRDUDE = avrdude

REMOVE = rm -f

REMOVEDIR = rm -rf

COPY = cp

WINSHELL = cmd




MSG_ERRORS_NONE = Errors: none

MSG_BEGIN = -------- begin --------

MSG_END = --------  end  --------

MSG_SIZE_BEFORE = Size before: 

MSG_SIZE_AFTER = Size after:

MSG_COFF = Converting to AVR COFF:

MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

MSG_FLASH = Creating load file for Flash:

MSG_EEPROM = Creating load file for EEPROM:

MSG_EXTENDED_LISTING = Creating Extended Listing:

MSG_SYMBOL_TABLE = Creating Symbol Table:

MSG_LINKING = Linking:

MSG_COMPILING = Compiling C:

MSG_COMPILING_CPP = Compiling C++:

MSG_ASSEMBLING = Assembling:

MSG_CLEANING = Cleaning project:

MSG_CREATING_LIBRARY = Creating library:


OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 

LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 

GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)


all: begin gccversion sizebefore build sizeafter end


build: elf hex eep lss sym


elf: $(TARGET).elf

hex: $(TARGET).hex

eep: $(TARGET).eep

lss: $(TARGET).lss

sym: $(TARGET).sym

LIBNAME=lib$(TARGET).a

lib: $(LIBNAME)


begin:

  @echo

  @echo $(MSG_BEGIN)


end:

  @echo $(MSG_END)

  @echo




HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf


sizebefore:

  @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

  2>/dev/null; echo; fi


sizeafter:

  @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

  2>/dev/null; echo; fi


gccversion : 

  @$(CC) --version


program: $(TARGET).hex $(TARGET).eep

  $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)


gdb-config: 

  @$(REMOVE) $(GDBINIT_FILE)

  @echo define reset >> $(GDBINIT_FILE)

  @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

  @echo end >> $(GDBINIT_FILE)

  @echo file $(TARGET).elf >> $(GDBINIT_FILE)

  @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

ifeq ($(DEBUG_BACKEND),simulavr)

  @echo load  >> $(GDBINIT_FILE)

endif

  @echo break main >> $(GDBINIT_FILE)


debug: gdb-config $(TARGET).elf

ifeq ($(DEBUG_BACKEND), avarice)

  @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

  @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

  $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

  @$(WINSHELL) /c pause


else

  @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

  $(DEBUG_MFREQ) --port $(DEBUG_PORT)

endif

  @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)


COFFCONVERT = $(OBJCOPY) --debugging

COFFCONVERT += --change-section-address .data-0x800000

COFFCONVERT += --change-section-address .bss-0x800000

COFFCONVERT += --change-section-address .noinit-0x800000

COFFCONVERT += --change-section-address .eeprom-0x810000


coff: $(TARGET).elf

  @echo

  @echo $(MSG_COFF) $(TARGET).cof

  $(COFFCONVERT) -O coff-avr $< $(TARGET).cof


extcoff: $(TARGET).elf

  @echo

  @echo $(MSG_EXTENDED_COFF) $(TARGET).cof

  $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof


%.hex: %.elf

  @echo

  @echo $(MSG_FLASH) $@

  $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@


%.eep: %.elf

  @echo

  @echo $(MSG_EEPROM) $@

  -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

  --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0


%.lss: %.elf

  @echo

  @echo $(MSG_EXTENDED_LISTING) $@

  $(OBJDUMP) -h -S -z $< > $@


%.sym: %.elf

  @echo

  @echo $(MSG_SYMBOL_TABLE) $@

  $(NM) -n $< > $@




.SECONDARY : $(TARGET).a

.PRECIOUS : $(OBJ)

%.a: $(OBJ)

  @echo

  @echo $(MSG_CREATING_LIBRARY) $@

  $(AR) $@ $(OBJ)


.SECONDARY : $(TARGET).elf

.PRECIOUS : $(OBJ)

%.elf: $(OBJ)

  @echo

  @echo $(MSG_LINKING) $@

  $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)


$(OBJDIR)/%.o : %.c

  @echo

  @echo $(MSG_COMPILING) $<

  $(CC) -c $(ALL_CFLAGS) $< -o $@ 


$(OBJDIR)/%.o : %.cpp

  @echo

  @echo $(MSG_COMPILING_CPP) $<

  $(CC) -c $(ALL_CPPFLAGS) $< -o $@ 


%.s : %.c

  $(CC) -S $(ALL_CFLAGS) $< -o $@


%.s : %.cpp

  $(CC) -S $(ALL_CPPFLAGS) $< -o $@


$(OBJDIR)/%.o : %.S

  @echo

  @echo $(MSG_ASSEMBLING) $<

  $(CC) -c $(ALL_ASFLAGS) $< -o $@


%.i : %.c

  $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 


clean: begin clean_list end


clean_list :

  @echo

  @echo $(MSG_CLEANING)

  $(REMOVE) $(TARGET).hex

  $(REMOVE) $(TARGET).eep

  $(REMOVE) $(TARGET).cof

  $(REMOVE) $(TARGET).elf

  $(REMOVE) $(TARGET).map

  $(REMOVE) $(TARGET).sym

  $(REMOVE) $(TARGET).lss

  $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)

  $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)

  $(REMOVE) $(SRC:.c=.s)

  $(REMOVE) $(SRC:.c=.d)

  $(REMOVE) $(SRC:.c=.i)

  $(REMOVEDIR) .dep


$(shell mkdir $(OBJDIR) 2>/dev/null)


-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)


.PHONY : all begin finish end sizebefore sizeafter gccversion \

build elf hex eep lss sym coff extcoff \

clean clean_list program debug gdb-config

'프로그램 > ATMega' 카테고리의 다른 글

AVR Studio에서 makefile 이 없다며 컴파일이나 빌드가 안될 경우 (0)	2013.10.17
PWM 제어 ATMega128 초간단 소스 (0)	2013.07.25
ATMega128 Timer / Counter 초간단 소스 (0)	2013.05.31
ATMega128 기초 강좌 : 센서/시리얼 등 (0)	2010.11.09
IAR 컴파일러 Warning : undefined behavior: the order of volatile accesses is undefined in this statement (6)	2010.04.01
ATMega - PWM 파형 (0)	2010.04.01
ATMega128 Timer Setting Howto (0)	2010.03.22
ATMega128 Pull UP Setting Howto (0)	2010.03.22
ATMega USB ISP(Down Loader) Setting( - ICCAVR/AVR Studio (0)	2010.02.23
스텝 모터 제어 정리 - ATMega (0)	2010.02.23

현재글ATMega128 UART 통신 샘플(RS232, 0번 USART)

꿈을 꾸게하는 OZSystem

"그 고양이는 외톨이로 태어나, 열대우림 어딘가에 살고, 죽을 때까지 다른 생물과는 한 번도 만나지 않아." - <언젠가 기억에서 사라진다 해도-에쿠니 가오리> 초록 고양이 中에서...

일상, GCC, 안드로이드, Windows, 음악, 건담, 초간단 소스, 노래, AT91SAM7S, 아이폰, Android, 일기, MG, C, 건프라, K5, ATMEL, #gunplakr, #K5, ARM,

Today :
Yesterday :

꿈을 꾸게하는 OZSystem

ATMega128 UART 통신 샘플(RS232, 0번 USART)

'프로그램 > ATMega' 카테고리의 다른 글

'프로그램/ATMega'의 다른글

티스토리툴바

« 2025/01 »
일	월	화	수	목	금	토
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

ATMega128 UART 통신 샘플(RS232, 0번 USART)

'프로그램 > ATMega' 카테고리의 다른 글

'프로그램/ATMega'의 다른글

관련글

티스토리툴바